Sean: Good Afternoon Chris! How are you today?
Chris: Afternoon! I'm all good...although this weekend has gone far too quickly, which may have something to do with Final Fantasy XV!! Before we get going, I really, *really* need to apologise for my inability to take photos.
So I think the first thing I should do is ask, why Ironjawz?
Sean: Your skin tones look so good, the shades and highlights really make the model pop. Even muscle definition on their backs, what is your process for creating this Orruk Skin? What paints and techniques do you use?
Chris: Firstly, thanks and I'm super glad you mentioned the backs! Oddly I kinda think the models look better from behind. The muscle definition there is great and the trouser backs paint up super nice as well.
As for how I go about painting the skin, I would sum it up in one word; inefficiently.
I used this method on some 40k/Gorkamorka Orks and as I liked the end result decided to replicate here. The issue is that the colours picked were just selected from the paints in my collection and perhaps do not transition from one another as well as they could. I suspect that you could achieve a similar result with near to half the stages if you were a bit more savvy.
So, the stages are;
Caliban Green / Waaagh Flesh mix
Waaagh Flesh / Warpstone Green mix
Biel-Tan Green wash
Waaagh Flesh / Warpstone Green mix
Warpstone Green / Warboss Green mix
I should note that I dilute all my paints with Lahmian Medium instead of water at all stages. I love the smooth application and finish this gives. Technique wise I referring to it as layering (I know some people will tell you all painting is layering, but whatever!) as opposed to blending. There's a lot of line/edge highlighting used across the army which is a technique I kinda just fell into recently. Again it can be time intensive, but with a steady hand is pretty simple and I enjoy the clean look it gives.
Sean: In regards to their armour, you achieve a great beaten up battle worn effect without making it look messy, something I personally want to be able to do myself. How do you go about painting the armour panels?
For the black armour plates, I firstly tidy them up after painting the skin before lining all the panels with grey, all the armour is very highly detailed with lots of ridges and beaten dents. Mechanicus Standard Grey is my choice here. To start with I add a lot of black to the mix, the second layer brings in more grey before a very fine, thin line around all the ridges and dents with pure grey. I also apply some Leadbelcher to larger areas I plan to chip at this point. Then, I cover it all in Army Painter Dark Tone wash.
So again, you could describe my style as inefficient as the wash takes down about the top two layers of grey. Also with what comes next you barely see what's left anyway...especially with my terrible photos!! I will say, I did try the chipping over a flat black and it just didn't look right, so I maintain the above is necessary (if only to preserve my own sanity).
The actual chipping is super easy, it just takes time. The only colour I use is Runefang Steel and, in the immortal words of Duncan Rhodes, just work my way around the model(!), applying small brushstrokes to simulate the chipped plates. I vary up the style of the strokes, from long thin lines to almost a dotted effect. I do all this with a normal brush which I think is key to keeping it clean and bright. You could do something similar with drybrushing or stippling, but for the most part would be duller, less controlled and has a tendency to look messy at times.
Sean: If you could do a quick basing guide, like a paint splatter in White Dwarf, what steps would it be?
*Paint sand Mournfang Brown
*Wash sand with Army Painter Strong/Dark Tone wash (I say Strong/Dark as I always forget which and am sure there are both colours used across the army!)
*Drybrush sand Zamesi Desert
*Drybrush sand Screaming Skull
*Glue down patches of static grass
*Paint rims black
That was originally it. Super simple. Too simple. So I did some thinking on how I could add another element/texture or just something to break it up and stand out without being over the top. So out came everyone's flavour of last month (think the new textures might supersede it); Agrellan Earth. So on the models I'd finished, I scraped away patches of sand, and for future models I left blank spaces on the base when applying sand;
*Paint the base Rhinox Hide (almost definitely not necessary)
*Coat the base in PVA (let this dry. Gives the texture paint something to adhere to and not flake away)
*Apply the Agrellan Earth (the thicker you put this on, the bigger the cracks you'll get. I am super anal with this and just scrape it off once dry if I don't like it and start over - I've used about 3 times as much of the stuff than I needed to. It's near impossible to have real control over it!)
*Cover the dried Agrellan Earth with Lahmian Medium (dunno why I do this? Let's say it seals it? Yeh, we'll go with that!)
*Drybrush the same as the sand (I do this at the same time so you are just drybrushing once across the entire base)
*Neatly paint Rhinox Hide in the bigger cracks where the drybrushing has crossed the line.
That's it! It's a really easy and simple basing method, just takes a bit of time and care. Much like the chipping.
Sean: I’m guessing this army is your labour of love. How many hours you think you have put into this so far? What else do you have planned for the Ironjawz?
Sean: What next for the Ironjawz?
Chris: Well, quite a lot really. Since I first gave you these answers (yes reader, it's taken me forever to take these awful photos!) I painted another 10 Brutes (taking me to 30) and a 2nd Warchanter for Clash! On top of that I have a 3rd Warchanter, 6 more Gore-Gruntas & 20 Ardboys. I also have plans for a second Megaboss on foot and have started acquiring Bloodbowl Orcs for some variant Ardboy conversions.
Sean: I know you are looking into branching out to other areas of Destruction. What are next plans for this?
Chris: I am planning a foray into Destruction as a Grand Alliance. The idea here is to make sure everything ties in with the Ironjawz aesthetically. I want an almost post-apocalyptic, dieselpunk look to some of the stuff. Battered iron plates, ramshackle looking tech etc. I guess that's the way I see the army fluffwise and thematically. I dunno how that sits with the official lore, but I don't really care. One of the beauties of AoS is the open ended realms, what's to say my Orruks couldn't be like this?
The first thing I need to do before I get over excited by Destruction is some generic battleline. I'm going with 3x 10 Ardboy Yoofz, using the Savage Orruk rules and models as a base. I'm replacing as much of the bone/stone bits with metal, giving them plasticard armour playing etc. I did a test model, I'll include a photo of that as well. Converting and painting 30 of these will be time consuming, but once done I will add some Big Stabbas, Rogue Idol of Gork (made from a 40k Gorkanaut) and a Wyvern amongst other things.
Sean: What ever happened to your Nurgle army, I loved the Varanguard Conversion!
Sean: Whats the AoS scene like around your local area, do you get to casually game much?
Chris: Yeh, it's pretty awesome tbh. There is a local club run in Dorchester by Paul Buckler (@WarhammerGC), that due to the power of media is now known as the Dorset Doggers! They meet every Thursday & Sunday so plenty of casual gaming opportunities...unfortunately I seem to be permanently painting at the moment, so not so much for me. We've also started a modified Path to Glory campaign in the Bournemouth area, featuring my Ironjawz. You can follow that on twitter as well @AscendencyAoS.
Sean: How much on a scale of 1 to Hard are you for GW right now?
Chris: So so hard man! I've been playing Warhammer since the back end of 4th edition WFB and I honestly cannot remember a better time to be in the hobby. Both the models and the game are at an all time high and we also have this amazing community going. Phenomenal.
Sean: What have you got to promote? What have you got in the pipeline for BlackSun, tournaments etc?
Tournament wise it's been one of my busiest years (definitely my best) and I'm wrapping it up nicely helping my friend Paddy run Age of Santa in Cardiff, in fact I'll be there now by the time you read this.
Next year we've already got Partners in Chaos, Sheffield Slaughter and many others to look forward to, including a trip to America in January for Waaagh! Paca, which should be awesome.
I'll also be running a 2 day event on 25-26th March (my birthday!!); Tomorrow Burns! That'll be a blast.
Sean: Where can people find you online, disregarding the gay dating sites?
Chris: Other than Grindr, the best place by far is Twitter, @the_black_sun. You can also check out my blog in the Destruction sub forum on TGA. Come over and let me know what you think of the Brutes. Once again, really sorry for the awful photos. I know everyone says it about their models, but they really do look much much better in person!! ;)
Thanks so much, speak to you again.
So thats it guys! A great interview about a fantastic unit! If you would like to follow Chirs' blog please visit Da Black Sunz and follow Chris on Twitter at https://twitter.com/the_black_sun. Also do not forget to download and subscribe to his podcast The Black Sun for up to date excellent funny coverage on all things Age of Sigmar!